800se C tuner 400MHz MIPS Processor WIFI

1,400MHz MIPS Processor 2,800se C tuner Linux operating system 3,WIFI 300 WLAN Supported

800se  c satellite receiver | 800se  C tuner

2*Smart Card-Reader, WIFI 

if you have any question on 800se ,please contact me.

TM:cn220085186

skype:cecosales3

800se  c   receiver

    

 400 MHz MIPS Processor (DVB 800 only has 300MHz.) Colored OLED Display (DVB 500-HD do not have)HDMI connector. (Not DVI connector) Plug & Play Slot for an internal2,5" SATA hard diskor eSATA. 10/100 MBit compatible Ethernet Interface. Plug & Play Tuner(Can Change the Tuner into DVB-C, DVB-T.) 2 x USB 2.0(DVB 500HD only have one)2 X Smart Card-Reader (DVB 800HD only have one.)WIFI, 300M WLAN supported

800se  c  satellite receiver pictures:

 

 

 

 800se C  specifications:

 

 

DVB receiver 800 HD se technical data

 

DBS-Tuner mit DVB-S2:

 

Frequency Range 950 .... 2150 MHz

 

Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)

 

Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC

 

DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

 

Video decoder:

 

Video Compression MPEG-2 and MPEG-1 compatible, H.264

 

Video Formats 4:3 / 16:9

 

Letterbox for 4:3 TV-Device

 

Audio decoder:

 

Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3

 

Audio Mode Dual (main/sub), Stereo

 

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

 

Output analog:

 

Output Level L/R 0,5 Vss on 600 Ohm

 

THD > 60 dB (1 kHz)

 

Crosstalk < -65 dB

 

 

Output digital:

 

Output Level 0,5 Vss on 75 Ohm

 

Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz

 

S/PDIF-Output optical, Toslink

 

 

Ausgang Video:

 

Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

 

Video parameter:

 

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm

 

Teletext filter in conformity with ETS 300 472 Standard

 

TV-Scart:

 

Output: FBAS, RGB, S-Video

 

Mini USB service connector:

 

Function: Update of Firmware

 

Ethernet

 

10/100 MBit compatible interface

 

Function: Update of Firmware

 

Analoge modem:

 

analoge modem for Internet connection

 

SATA Interface:

 

for internal 2,5" HDD

 

USB

 

2 x USB 2.0

 

LNB power and polarisation per tuner:

 

LNB Current 500mA max.; short-circuit-protected

 

LNB Voltage vertical < 14V no load, > 11,5V at 400mA

 

LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

 

Count of active satellit position:

 

DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

 

Power consumption:

 

< 15W at 12V

 

External PSU

 

Input:

 

110-240V AC / 50-60Hz / 0,6A

 

Output:

 

12V = / 3,0A

 

Physical specification:

 

Ambient Temperature +15°C...+35°C

 

Humidity < 80%